1-2
DSC-S40
1-3. THE CAUTIONS AT THE TIME OF LENS BLOCK HANDLING
In case you deal with a lens block, be careful of the following things.
Self-diagnosis display
•
C:
ss
:
ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
•
E:
ss
:
ss
Contact your Sony dealer or local
authorized Sony service facility.
Display Code
C:32:
ss
C:13:
ss
Countermeasure
Turn the power off and on again.
Format the “Memory Stick” or internal
memory.
Cause
Trouble with hardware.
“Memory Stick” or internal memory is
unformatted.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:
ss
E:91:
ss
E:92:
ss
1-4. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY
Insert a new “Memory Stick”.
“Memory Stick” is broken.
Turn the power off and on again.
Trouble with internal memory.
INTERNAL MEMORY ERROR
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
—
Checking of flash unit or replacement
of flash unit. (Note)
Insert batteries correctly.
Abnormality when flash is being
charged.
Batteries are not inserted correctly.
Note:
After repair, be sure to perfom “1-6. PROCESS AFTER FIXING FLASH ERROR”.
Touch the flexible board of motor side recklessly or
don’t bend it., because the mounted chip parts could
be peeled if the flexible board is curved.
CD-575 flexible board is integrated with the lens block.
Do not touch or separate the CD board.
CD-575 flexible board becomes only exchange by lens block.
Have the portion of upper
and lower arrows with
two fingers.
Содержание DSC-S40 - Cyber-shot Digital Still Camera
Страница 24: ...DSC S40 Schematic diagrams of the CH 169 and SY 116 boards are not shown Pages from 4 9 to 4 26 are not shown ...
Страница 30: ...Printed wiring boards of the CH 169 and SY 116 boards are not shown Pages from 4 37 to 4 40 are not shown ...
Страница 35: ...DSC S40 Waveforms of the SY 116 board are not shown Page 4 49 is not shown ...
Страница 36: ...DSC S40 Mounted parts location of the SY 116 board is not shown Page 4 50 is not shown ...