under the following conditions:
The battery pack is used at an ambient temperature of 25°C (77°F).
Using Sony Memory Stick PRO Duo (Mark2) media (sold separately)
[Display Quality]: [Standard]
The number for “Shooting (still images)” is based on the CIPA standard, and is
for shooting under the following conditions (CIPA: Camera & Imaging Products
Association):
DISP: [Display All Info.]
One picture is taken every 30 seconds.
The zoom is switched alternately between the W and T ends.
The flash strobes once for every two pictures.
The power is turned on and off once every ten times.
The number of minutes for movie shooting is based on the CIPA standard, and
is for shooting under the following conditions:
The image quality is set to XAVC S HD 60p 50M/50p 50M.
Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting
stand-by, turning on/off, etc.
Continuous movie shooting: Battery life based on non-stop shooting until the limit (29
minutes) has been reached, and then continued by pressing the MOVIE (Movie) button
again. Other functions, such as zooming, are not used.
If the remaining battery is not displayed, press the DISP (Display Setting).
[13] How to Use
Preparing the camera
Charging the battery pack
Supplying power from a wall outlet (wall socket)
By using the supplied AC adaptor, you can shoot and playback images while the
power is supplied from a wall outlet (wall socket) without using up the battery
power.
1. Insert the battery pack into the camera.
2. Connect the camera to the wall outlet (wall socket) with a micro USB cable
(supplied) and an AC adaptor (supplied).
Note
