Creating an image database file
If you insert a memory card that does not contain an image database file into the
product and turn on the power, the product automatically creates an image
database file using some of the memory card’s capacity. The process may take a
long time and you cannot operate the product until the process is completed.
If a database file error occurs, export all images to your computer using
PlayMemories Home, and then format the memory card using this product.
Do not use/store the product in the following places
In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become
deformed and this may cause a malfunction.
Storing under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a
malfunction.
In a location subject to rocking vibration
Near strong magnetic place
In sandy or dusty places
Be careful not to let sand or dust get into the product. This may cause the
product to malfunction, and in some cases this malfunction cannot be repaired.
On storing
Always attach the lens front cap when you are not using the camera.
On operating temperatures
Your product is designed for use under the temperatures between approximately
0°C and 40 °C (32 °F and 104 °F). Shooting in extremely cold or hot places that
exceed this range is not recommended.
On moisture condensation
If the product is brought directly from a cold to a warm location, moisture may
condense inside or outside the product. This moisture condensation may cause
a malfunction of the product.
To prevent moisture condensation when you bring the product directly from a
cold to a warm location, first put it in a plastic bag and seal it to prevent air from
entering. Wait for about an hour until the temperature of the product has
reached the ambient temperature.