Sony DRN-XM01C2, Руководство по обслуживанию, Страница: 5 / 54

5
DRN-XM01C2/XM01CK2/XM01H2/
XM01HK2/XM01R2
SECTION 2
GENERAL
This section is extracted from
instruction manual.
Installing the Main Unit in the
Cradle
Insert the main unit completely into the cradle until the main unit is
locked in the cradle.
To remove the main unit from the cradle
While pressing the two cradle release buttons on the left and right sides of
the main unit, pull out the main unit from the cradle.
Replacing the Lithium Battery
into the Remote Commander
Replace the battery when the buttons on the remote commander do not
work. Remove the old battery and insert a new one.
1
Insert a long and thin object into the hole, then pull out the
lithium battery holder.
2
Replace the lithium battery with the positive (+) side facing
up.
3
Insert the battery holder into the remote commander until it
clicks.
Battery life
(Approx.)
Sony lithium battery CR2025 1 year
2
3
1
Main unit
Cradle
Cradle release
button
Cradle release
button
Remote commander
Parts and Identifications
Main unit
Display window
DSPL/BACK/BAND*
2
MEMO
JOG roller (MENU/ENTER)
Preset buttons (1-5)*
1
Cradle release button
Using the JOG Roller (MENU/ENTER)
Turn up or down to select channels,
select the menu items and settings, or
scroll the stored text information in
the menu operation.
Press to display the menu display, or
execute the items or settings in the
menu operation.
Displaying the Radio ID
The receiver has its own ID, and an ID number is required when
registering in XM.
1
Press POWER to turn on the main unit.
2
Turn JOG roller (or press X ⁄ x on the remote) to select
“
XM1
CH0 RADIO ID”.
The radio ID appears.
CHO RADIO ID
XXXXXXXX
XM1
Note
The Radio ID can be displayed only in Channel Scroll mode. See “Playing
the Receiver”.
1 2 3
BAND
MEMO DSPL
4 5 6 1
7 8 9 2
0
SELECT
3
MENU
4
BACK ENTER
5
CH
PRESET
POWER
Remote sensor
Cradle
release
button
DSPL
POWER* 1
MEMO
Numeric
buttons
SELECT
MENU
BACK
X
/
x
POWER
BAND* 2
PRESET
ENTER
Radio ID
*
1
The POWER and preset button No. 3 on the main unit have a tactile dot.
*
2
To show the display for selecting a band, hold down DSPL/BACK/
BAND for more than 2 seconds, or press BAND on the remote.
To select a band, press DSPL/BACK/BAND (or BAND on the remote).