22
DRN-XM01C2/XM01CK2/XM01H2/
XM01HK2/XM01R2
5-3. How to use DRN-XM01 Service Tool
Note: When the Write Firmware program is executed, all of the information that has been preset by customer is cleared. Before executing
the Write Firmware program, take a note of the information that has been preset by customer. After execution of the Write Firmware
program is completed, set the saved information to recover the original setup.
1. Connect the DRN-XM01 power cord to the wall outlet and connect the DRN-XN01 to a PC with the USB cable.
Note: Even if the power of the DRN-XM01 is not turned on, the DRN-XM01 Service Tool firmware can be activated but an error occurs
during sequence of the execution. So, be sure to turn on the power of the DRN-XM01. Because DRN-XM01 Service Tool firmware
cannot be updated if the power of the DRN-XM01 is not turned on.
2. Select Start
t
Program
t
DRN-XM01ServiceTool to start up the tool.
3. When DRN-XM01ServiceTool starts up, the following dialog box appears prompting you to confirm that the characters "DRN-XM01" is
displayed in the Product Name (1), the present version in the Device Version (2) and the present serial number in the Serial No text boxes.
(When the serial number is not written due to replacement of CPU board or others, the characters "------" appear.)
