1-6
HDR-CX530E/CX535/CX610E/PJ530E/PJ540/PJ540E/PJ610E_L2
– ENGLISH –
(5) Remove the three screws and remove the Motor B.
Screws
Motor B
FRONT
TO
P
(6) Disconnect the connector and remove the FP-2189 Flexible
Board and the Radiation Sheet while detaching the four bosses.
FR
ONT
TOP
TOP
Bosses
Adhesive
part
Adhesive
part
Bosses
FP-2189
Flexible Board
FP-2189 Flexible Board
Connector
Connector
CM Radiation Sheet
(7) Remove the six screws and remove the Frame (E-SUB-A), Frame
(E-SUB-B), Ball Bearing while detaching the six bosses and the
shaft.
FRONT
TO
P
Screws
Screws
Bosses
Bosses
Shaft
Hole
Frame (E-SUB-A),
Ball Bearing
Frame (E-SUB-B)
(8) Peel off the Adhesive Part of the Motor A Flexible Board while
detaching the two bosses.
Adhesive part
Flexible Board of
the Motor A
Bosses
FRONT
TO
P
(9) Remove the three screws and remove the Sheet Metal B and the
Mecha Stop Rubber while detaching the two bosses.
Screw
Screws
Sheet Metal B
Boss
Boss
Mecha Stop Rubber
FR
ONT
TO
P
(10) Remove the three screws and remove the Motor A while detach-
ing the two bosses.
Screws
Motor A
Boss
Boss
FRO
NT
TOP
(11) Remove the three screws and remove the Sheet Metal A while
detaching the six bosses, and then disconnect the lens Flexible
Board from the connector on the FP-2126 Flexible Board.
Screw
Screw
Connector
Lens
Flexible Board
Lens
Flexible
Board
FP-2126
Flexible Board
FP-2126 Flexible Board
Sheet Metal A
Bosses
Bosses
Boss
Boss
TOP
FRONT
(12) Peel off the Adhesive Part of the FP-2126 Flexible Board while
detaching the two bosses.
Adhesive part
FP-2126 Flexible Board
Sheet Metal A
Bosses
TOP
FR
ONT
