Sony Docomo Xperia Z1 SO-01F, Инструкция по эксплуатации

Страница: 38 / 250

36 Before Using the Terminal
･
When a screen for new hardware
detection etc. appears on the PC, select
"
キャンセル
(Cancel)".
3
When the charging is complete,
remove the USB plug of the
microUSB cable from the USB port
of the PC.
4
Remove the microUSB plug of the
microUSB cable evenly from the
terminal.
5
Close the microUSB jack cover,
firmly press it and make sure that
there are no gaps between the
terminal and cover.
❖
Note
･
Installation of an MTP driver to a PC is required when
charging the battery with a Microsoft Windows XP
PC, because "USB connection mode" (P.183) is set to
"Media transfer mode (MTP)" by default. Install
Windows Media Player 10 or later to install an MTP
driver.
･
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
1
Press and hold
P
for over a
second.
･
The terminal vibrates and unlock screen
appears after a while.
2
Cancel the screen lock.
･
Canceling the screen lock (P.37)
･
When the language selection screen
appears after canceling the screen lock,
make initial settings (P.38).
❖
Information
･
If the battery level is low, the notification LED flashes
in red 3 times when
P
is pressed to turn the power
on. Charge the terminal (P.31).
･
When SIM card lock (P.165) is set, enter PIN code on
the PIN code entry screen (P.165).
Turning power on/off
Turning power on