masterpage:Left
filename[D:\Mavica1000\3062474111\3062474111DirectCDUC\02GB-
DirectCDUC\03pre.fm]
8
model name1[MVC-CD1000]
[3-062-474-11(1)]
Using DirectCD
You have to install the USB driver into your personal computer to connect the MVC-
CD1000 to your personal computer with the USB cable. For details on the
installation of the USB driver and on the directory, refer to the operating instructions
of the MVC-CD1000.
When you use a new disc or record a new image onto the disc that was finalized, you
have to format the disc (page 9).
Note
When you write new data onto the disc, before removing
the disc from the MVC-CD1000, be sure to follow the
procedure for removing the disc (page 12). If you remove
the disc or disconnect the USB cable, without following
the procedure, data on the disc may be broken.
Starting DirectCD
1
After starting up your computer, insert a disc into the MVC-
CD1000, and connect to your personal computer with the USB
cable.
2
Turn on the MVC-CD1000 and your personal computer.
“DirectCD Disc Ready” appears on the screen.
If this screen does not appear, double-click the CD icon
on the Windows
taskbar, in the lower corner of your screen.
to the USB connector
Personal computer
USB cable
to the DIGITAL I/O jack
Push in until the
plug clicks into
place
01cov.book Page 8 Tuesday, May 23, 2000 4:28 PM
