background image

DHCMD5  3-858-047-12.EN (1)

31

1

COMBINE

2

3

1

2

3

4

3

Press ENTER/YES.

“Rehearsal” and “Track ok?” appear
alternately and the portion where the
two tracks will join (i.e., the end of the
first track and the beginning of the
second track) is played repeatedly.
If you want to cancel the combine
function at this time, press 

π

.

4

Press ENTER/YES again when you
find the portion.

“Complete” appears for a few seconds
and the tracks are combined.

Notes

• When “SHUFFLE” or “PROGRAM” appears in

the display, press PLAY MODE repeatedly until
the indication disappears.

• If both of the combined tracks have track titles, the

title of the second track is erased.

• If “Sorry” appears, the tracks cannot be combined.

This happens when you’ve edited the same track
too many times.  This is due to a technical
limitation of the MD system and is not a
mechanical error.

Combining recorded
tracks

— Combine Function

This function lets you put several tracks or
several independently recorded portions into
a single track.  The total number of tracks
decrease by one and all the tracks following
the combined ones are renumbered.

Example:  Combining tracks B and C.

A

B

C

D

Original
tracks

Track
number

1

Turn MULTI JOG until the second
track of the two to be combined
appears.

For example, to combine tracks 3 and 4,
select track 4.

2

Press EDIT/NO, then turn MULTI
JOG until “Combine?” appears.

D

A

B

C

Combine tracks B
and C.

2

π

1,2 3,4

®

·

π

§

º

Содержание DHC-MD5

















































Отзывы: