![background image](http://html.mh-extra.com/html/sony/dhc-md373/dhc-md373_operating-instructions-manual_420516059.webp)
Additional Information
59
Cannot REC
• A pre-mastered MD is in the deck.
• The function is switched to MD.
Complete !!
The editing operation of MDs is completed.
Disc Full!!
There is no time remaining on the MD.
Eject
The MD deck is ejecting the MD.
Impossible
• You tried to make an impossible editing
operation.
• You cannot combine the tracks due to the
system limitations of MDs.
Name Full
There is no more space to store track or disc
titles.
No Disc
There is no disc in the MD deck.
No Name
You tried to show the title of a non-labelled
disc or track.
—OVER—
You have reached the end of the MD while
keep pressing MD/CD
M>
during playing
pause.
Push STOP!
You pressed PLAY MODE during play.
—Rehearsal—
The MD is playing the specified dividing point
for confirmation during the Divide function.
Smart Space
The signal was input again after silence
continued for 3 or more but less than 30
seconds during digital recording.
C41/Cannot Copy
The sound source is a copy of a commercially
available music software, or you tried to record
a CD-R (Recordable CD).
c
The Serial Copy Management System
prevents making a digital copy (see page 55).
You cannot record a CD-R.
C71/Check OPT-IN
This appears momentarily because of the signal
of the digital broadcast during recording.
c
There is no affect on the recorded contents.
No component is connected to the DIGITAL
OPTICAL IN jack, or a digital component is
not connected properly.
c
Connect a digital component to the DIGITAL
OPTICAL IN jack properly using a digital
connecting cable (not supplied, see page 53).
The connected digital component is not turned
on.
c
See the operating instructions supplied with
the connected component and confirm
whether the component is turned on.
The digital connecting cable connected to the
DIGITAL OPTICAL IN jack is pulled out, or
the connected digital component is turned off
during digital recording.
c
Connect the cable, or turn on the digital
component.
Messages
One of the following messages may appear or
flash in the display during operation.
MD
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
Blank Disc
The inserted recordable MD is new, or all
tracks on the MD have been erased.
Cannot Edit
• A pre-mastered MD is in the deck.
• You tried to edit in Programme or Shuffle
Play mode.
continued