DECR-1000 A
2-886-333-
11
(1)
G:\Sagyou\07 Jul\0706\837913S DECR-1000
A_GB\2886333111DEHR1000\01GB05GET.fm
masterpage:Left
28
Setting up with the administration tool
Setting up with the administration tool
To configure the unit using settings
saved on the host PC:
1
Check that the IP address defined in the
host PC’s settings file is the same as
that assigned to the unit.
If the IP address defined in the settings file and
the unit’s IP address are different, use a text
editor to change the IP address in the settings
file on the host PC to that assigned to the unit.
2
Click “Browse” and select the setting file.
3
Click “Setting”.
This causes the settings of the unit to be
updated.
Network
Upon clicking “Network”, the following screen is
displayed. This screen is used to change the
method for obtaining an IP address and to change
the values required for network configuration.
If you want to change the network settings, enter
the new network settings in the appropriate fields
in this screen and then click “Setting
confirmation”. The following confirmation screen
is then displayed.
Click “Setting” to begin processing the settings.
After the configuration is set, the following screen
is displayed.
Modify the network connection mode as needed,
and access the URL displayed on the screen.
01GB01COV.book Page 28 Thursday, July 6, 2006 2:50 PM
