Sony DDigital betacam VW-790WSP, Руководство по эксплуатации, Страница: 255 / 296

Chapter 6 Maintenance
6-7
6
6
Press the VTR START button again, and check that the tape stops
and that the REC indicator in the viewfinder goes off.
7
Repeat the checks of steps
5
and
6
, this time using the VTR button
on the lens.
8
Press the RESET button, and check that the counter display goes to
“00 : 00 : 00 : 00”.
9
Turn on the LCD LIGHT switch, and check that the display panel is
illuminated.
10
Hold down the REW button to rewind the tape for a while, then
press the PLAY button. Check that the rewind and playback
functions operate normally.
11
Press the STOP button and press the F FWD button. Check that the
fast forward function operates normally.
2
Testing the automatic audio level adjusting
functions
1
Set the AUDIO SELECT CH-1/CH-2 switches to AUTO.
2
Set the AUDIO IN switches to FRONT.
3
Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels correspond to the sound level.
3
Testing the manual audio level adjusting functions
1
Set the AUDIO IN switches to FRONT.