170
Connecting your camcorder to a
computer using the USB cable (For
Macintosh users) (DCR-TRV22/TRV33 only)
When connecting to a computer with the USB cable
You must
install a USB driver
onto a computer in order to connect your camcorder to
the computer’s USB port. The USB driver can be found on the CD-ROM supplied, along
with the application software required for viewing images.
Recommended Macintosh environment
Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X (v10.0/v10.1/v10.2) standard installation is
required.
However, note that the update to Mac OS 9.0/9.1 should be used for the following
models.
•iMac with the Mac OS 8.6 standard installation and a slot loading type CD-ROM drive
•iBook or Power Mac G4 with the Mac OS 8.6 standard installation
The USB port must be provided as standard.
QuickTime 3.0 or later must be installed to play back moving pictures.
Notes
•Operations are not guaranteed for the Macintosh environment if you connect two or
more USB equipment to a single computer at the same time, or when using a hub.
•Some equipment may not operate depending on the type of USB equipment that is
used simultaneously.
•Operations are not guaranteed for all the recommended computer environments
mentioned above.
•Macintosh, iMac, iBook, Power Mac and Mac OS, QuickTime are trademarks of Apple
Computer Inc.
•All other product names mentioned herein may be the trademarks or registered
trademarks of their respective companies. Furthermore, “TM” and “®” are not
mentioned in each case in this manual.
Содержание DCR-TRV33 PIXELA ImageMixer v1.5
Страница 8: ...DCR TRV33 TRV33E 8 Sony EMCS Co 2003B1600 1 2003 2 Published by DI Customer Center 9 876 223 41 ...
Страница 228: ...Printed in Japan Printed on 100 recycled paper using VOC Volatile Organic Compound free vegetable oil based ink ...
Страница 229: ...Revision History 987622341 pdf Reverse Ver 1 0 Date 2003 02 History Official Release Contents S M Rev issued ...