Sony DCR-TRV130 - Digital8 Camcorder, Руководство по обслуживанию

Страница: 84 / 165

5-5
Front of the lens
1.5 m
Pattern box
Fig. 5-1-2.
1-1-2. Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
1) Connect the equipment for adjustments according to Fig. 5-1-4.
2) Connect the adjustment remote commander to CN1011 of VC-
256 board via CPC jig for BX/BK (J-6082-521-A). To operate
the adjustment remote commander, connect the AC power
adapter to the DC IN jack of CPC jig for BX/BK, or connect
the L series Info-LITHIUM battery to the battery terminal of
CPC jig for BX/BK. (Fig. 5-1-3.)
3) The front panel block (MI-041 board, microphone unit, video
light) need not be assembled except during the steady shot
operation check.
Note3:
As removing the cabinet (R) (removing the VC-256 board CN1007)
means removing the lithium 3V power supply (CF-1000 block
BT101), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time etc.) will be lost. Before removing, note down
the self-diagnosis data (data of page: 2, address: B0 to C6) and
data on history use (data of page: 2, address: A2 to AA and E0 to
E5). (Refer to “5-4. Service Mode” for the self-diagnosis data and
data on the history use.)
Note4:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the SS-1000 block removed. After completing adjustments,
be sure to exit the “Forced Camera Power ON Mode”.
Note5: Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Fig. 5-1-3.
Remove the
CPC lid
CN1011
2
1
20 19