Sony DCR-HC41, Руководство по обслуживанию

Страница: 109 / 216

6-27
DCR-HC39E/HC41/HC42/HC42E/HC43/HC43E
5-2. Flange Back Adjustment (2)
RadarW RadarW RadarW RadarW RadarW
Perform this adjustment after performing “Flange Back Adjust-
ment (1)”.
Subject
Subject more than 500 m away
(Subject with clear contrast such as
buildings, etc.)
Measurement Point Adjusting remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 11, 48 to 58
Specified value
Data of page: F, address: 57 is“00” to “0B”
Data of page: 6, address: 0C is“00”
Note 1: Perform the adjustment with the lens in horizontal state.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3:
Check that the data of page: 6, address: 02 is “00”. If
not, select page: 6, address: 01, set data: 00, and press
PAUSE button.
Note 4: Don't touch the zoom lever during adjustment.
Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT PLUS ........................................................ OFF
3) COLOR SLOW S (Menu setting) ................................... OFF
Preparations before adjustments:
1) Set the zoom lens to the TELE end and expose a subject that is
more than 500 m away.
(subjects with clear contrast such as building, etc.)
(Nearby subjects less than 500 m away should not be in the
screen)
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 6 01 13 Press PAUSE button.
3 Wait for 2 seconds.
4
Place ND filter on the lens so
that the optimum image is
obtain.
5 6 01 29 Press PAUSE button. (Note 5)
6 6 02 Check the data changes to “01”.
7 6 0C Check the data is “00”.
8 F 57 Check the data is “00” to “0B”.
Note 5:
The adjustment data will be automatically input to page:
F, address: 11, 48 to 58.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 01 25 Press PAUSE button.
3 6 01 00 Press PAUSE button.
4 0 01 00
5
Perform “Flange Back
Check”.
6. Flange Back Check
Subject Siemens star
(2.0 m from the front of the lens)
(Luminance: approx. 200 lux)
Measurement Point Check operation on monitor TV
Measuring Instrument
Specified value Focused at the TELE end and WIDE
end
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Switch setting
1) POWER ............................................. CAMERA-TAPE mode
Note 2:
When the auto focus is ON, the lens can be checked if it
is focused or not by observing the data on the page: 1 of
the adjusting remote commander.
1 : 00 : XX
Odd: Focused
Even: Unfocused
Preparations before adjustments:
1) Place the Siemens star 2.0 m from the front of the lens.
2) To open the IRIS, decrease the luminous intensity to the Si-
emens star up to a point before noise appear on the image.
Checking method:
Order Page Address Data Procedure
1 6 40 01
2 6 41 01
3
Shoot the Siemens star with
the zoom TELE end.
4 Turn on the auto focus.
5 0 03 0F
6
1
Check that the lens is
focused. (Note 2)
7 6 21 10
8
Shoot the Siemens star with
the zoom WIDE end.
9
Observe the TV monitor and
check that the lens is
focused.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 21 00
2 6 40 00
3 6 41 00
4 0 03 00