56
You can operate camera brightness and fader on the touch panel when looking at the
viewfinder. Turn the LCD panel over and move it back to your camcorder body with
the LCD screen facing out to do this operation.
The POWER switch should be set to
.
Operate by touching the panel.
(
1
)
Turn the LCD panel over and move it back to your camcorder body with the
LCD screen facing out, then extend the viewfinder.
(
2
)
Press
OFF. The PANEL OFF indicator appears on the screen.
(
3
)
Press OK. The LCD screen is turned off.
(
4
)
Using the viewfinder, press the LCD screen.
EXPOSURE,
OK,
ON and FADER appear.
(
5
)
Press the LCD screen and select a desired item, then press
OK.
EXPOSURE: Adjust the exposure by pressing –/+.
FADER:
Press FADER until a desired fader mode appears.
The indicator changes as follows:
t
FADER
t
M. FADER
t
BOUNCE
(no indicator)
T
MONOTONE
T
ON:
The LCD screen lights up.
To make the buttons on the LCD screen disappear
Press
OK.
Note
When the POWER switch is set to VCR, you cannot operate with the touch panel using
the viewfinder.
To operate the items that do not appear
Set the LCD panel and the viewfinder back to the previous position. Operate the items
using the LCD screen.
Available recording time
This is the time when you record pictures using the viewfinder (p. 14).
Using the viewfinder
EXPO–
SURE
OK
ON
FADER
Viewfinder
