98
1
...Open the shoe cover.
345
...Open the jack cover.
1
Active Interface Shoe
The Active Interface Shoe supplies power
to optional accessories such as a video
light, a flash, or a microphone. The
accessory can be turned on or off as you
operate the POWER switch on your
camcorder. Refer also to the instruction
manual supplied with your accessory for
details.
• The Active Interface Shoe has a safety device
for fixing the installed accessory securely. To
connect an accessory, press down and push it
to the end, and then tighten the screw. To
remove an accessory, loosen the screw, and
then press down and pull out the accessory.
• When you are recording with the external
flash (optional), turn off the power of the
external flash to prevent charging noise being
recorded.
• You cannot use an external flash (optional)
and the built-in flash at the same time.
• When an external microphone (optional) is
connected, it takes precedence over the
internal microphone (p.44).
2
Shoe cover
3
REMOTE jack
• Connect other optional accessories.
4
A/V (audio/video) jack (p.52, 92, 94)
5
DC IN jack (p.21)
6
Jacks to connect external devices