18
GB
Notes
• Make connections securely to prevent unwanted noise.
• Refer to the instructions supplied with the TV.
• The system cannot output an audio signal to the connected TV. Only the audio signal of the TV is output from the
system speakers.
To listen to the game machine (e.g., PlayStation 2) sound by using the
system
Connect the audio output jacks of the game machine to the SAT AUDIO IN (L/R) jacks of the system
with the audio cords (not supplied).
To change the color system (PAL or NTSC)
*
* Asian, Australian, and Saudi Arabian models only.
Depending on the TV to be connected, you may be required to select either PAL or NTSC of the
system.
The initial setting of the system for Australian and Saudi Arabian models is PAL.
The initial setting of the system for Asian models is NTSC.
If the color system of the TV is PAL
To set the system to PAL from NTSC, turn on the system by pressing
"
/
1
while pressing the PAUSE
button on the system. You need to hold the PAUSE button until the set powers on.
To reset to NTSC, turn off the system and then turn on again by pressing
"
/
1
while pressing and
holding the PAUSE button on the system.
If the color system of the TV is NTSC
Do the same operation above to set the system to NTSC from PAL.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 66.
R
AUDIO
OUT
L
OUTPUT
R
AUDIO
OUT
L
OUTPUT
FRONT L
WOOFER
SURR L
CENTER
WOOFER
SPEAKER
MONITOR OUT
COMPONENT VIDEO OUT
FRONT R
SURR R
AUDIO IN
L
Y
P
B
/C
B
P
R
/C
R
VIDEO
S VIDEO (DVD ONLY)
R
AUDIO IN
L
R
VIDEO
SAT
COAXIAL
AM
FM
75
Y
P
B
/C
B
P
R
/C
R
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
IN
INPUT
IN
IN
IN
OUT
OUT
TV with
COMPONENT
VIDEO IN jacks
Digital satellite
receiver
VCR
TV with
S VIDEO jack
TV
