Sony DAV-DZ300, Руководство по эксплуатации

Страница: 70 / 100

70
GB
6
Press X / x to select the preset number
you want.
7
Press ENTER.
The station is stored.
8
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
Listening to the radio
Preset radio stations in the system’s memory
first (see “Presetting radio stations” (page 69)).
1
Press FUNCTION repeatedly until “FM”
or “AM” appears in the front panel
display.
The last received station is tuned in.
2
Press or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station.
3
Adjust the volume by pressing
/–.
To turn off the radio
Press
"
/
1
.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press or –
repeatedly.
For automatic tuning, press and hold
or –. Press
x when you stop the automatic
tuning.
• If an FM program is noisy, press FM MODE so that
“MONO” appears in the front panel display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
• To improve reception, reorient the supplied antennas
(aerials).
• You can check the frequency by pressing DISPLAY
repeatedly (page 52).
Naming preset stations
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the
system’s front panel display when a station is
selected.
Note that no more than one name can be entered
for each preset station.
1
Press FUNCTION repeatedly until “FM”
or “AM” appears in the front panel
display.
The last station you received is tuned in.
2
Press or – repeatedly to
select the preset station you want to
create an index name for.
3
Press TUNER MENU.
4
Press
C
/
X
/
x
/
c
repeatedly until “NAME
IN” appears in the front panel display.
5
Press ENTER.
6
Create a name by using the cursor
buttons.
Press
X
/
x
to select a character, then press
c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake
Press
C
/
c
repeatedly until the character to
be changed flashes, then press X / x to select
the desired character.
Tip