26
Using your VIDEO CD
player in a car (audio
only)
You can listen to a CD in a car by connecting
your CD player to the car cassette deck.
You cannot use the car mount plate for this
VIDEO CD player.
When you use your VIDEO CD player in a
car, install it securely in a location that does
not interfere with your driving.
Optional car accessory needed
To connect your VIDEO CD player to a car
cassette deck, you need the following car
accessories in “Accessories (supplied/
optional)”:
• Car battery cord, and
• Car connecting pack*
For details, see the instruction manuals that
come with the optional accessories.
* Noise may be heard if you use an optional
connecting cord. It is recommended that you use
a Sony car connecting pack to reduce noise.
Switched ignition function (when
using the car battery cord)
With this feature, your VIDEO CD player
stops automatically when you turn off the car
engine (turn off the ignition key) even if the
batteries are inserted in the VIDEO CD
player. This function is invalid depending on
the car models.
Notes
• Use only the car battery cord listed in “Accessories
(supplied/optional).” If you use any other car battery
cord, a heat, smoke or malfunction may occur.
• Do not operate the system in a way that might
divert your attention from driving safely. As a
driver, you alone are responsible for safely
operating your vehicle in accordance with traffic
safety laws at all times.
• Do not install the system where it may obstruct
your view through the windshield or your view of
your vehicle’s indicator displays.
• Do not install the system where it may hinder the
function of safety devices such as an air-bag.
Doing so may prevent the air-bag from
functioning properly in the event of an accident.
Connecting a stereo system
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
When using the connecting cord
• You cannot adjust the volume of the
headphones/earphones on the CD player or
the remote control.
• If the sound is distorted, connect the device
to the
i
/REMOTE jack.
• The SOUND function does not work.
