the Metered Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
The brightness of the image on the monitor may differ from the actual image being shot.
[32] How to Use
Shooting
Selecting a shooting mode
Memory recall
Allows you to shoot an image after recalling often-used modes or camera settings registered
in advance.
1. Set the mode dial to MR (Memory recall).
2. Press the left/right side of the control wheel or turn the control wheel to select the
desired number, then press
on the center.
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings
are given priority and the original settings may become invalid. Check the indicators on
the screen before shooting.
[33] How to Use
Shooting
Selecting a shooting mode
Movie
You can change the shooting mode for recording movies. You can also check the image
angle before shooting.
1. Set the mode dial to
(Movie).
2. MENU
→
(Camera Settings
) →
[Movie]
→ desired setting.
When [Mode Dial Guide] is set to [On], you can select the desired settings after you
have changed the position of the mode dial.
3. Press the MOVIE button to start recording.
Press the MOVIE button again to stop recording.