Sony CYBER-SHOT DSC-V1, Руководство по эксплуатации

Страница: 21 / 132

21
S
hoo
ting st
ill
im
ages
,
Press and hold the shutter
button halfway down.
The beep sounds but the image is not yet
recorded. When the AE/AF lock indicator
changes from flashing to steadily lit, the
camera is ready for shooting.
(The LCD screen may be frozen for a split
second depending on the subject.)
The flash automatically pops up and strobes
when the surroundings are dark.
• If you release the shutter button, shooting will
be canceled.
• When the camera does not beep, the AF
adjustment is not complete. You can continue to
shoot, but the AF is not set properly (except in
Continuous AF, page 47).
,
Press the shutter button fully
down.
The shutter sounds. The image will be
recorded in the “Memory Stick.” When the
recording lamp (page 9) goes out, you can
shoot the next image.
•
The frame indicated on the LCD screen shows
the focus adjustment range (AF range finder,
page 46).
• When operating the camera using a battery
pack, if you do not operate the camera for a
while during recording or playback, the camera
turns off automatically to prevent wearing
down the battery (page 14).
3
F2.8
30
0EV
96
60
min
VGA
FINE
101
S AF
AE/AF lock indicator
Flashes green
t
Light up
4
95
60
min
VGA
101
S AF
Mode dial for still image
shooting
When shooting still images with your
camera, you can choose from the following
shooting methods.
(Auto adjustment mode)
The focus, exposure and white balance are
automatically adjusted to allow easy
shooting. The image quality is set to [Fine]
(page 41).
P (Program auto shooting)
You can set the desired shooting functions
using menus (pages 39 and 111). In
addition, you can change the combination
of the F value and the shutter speed
(Program Shift, see page 43).
S (Shutter speed priority)
You can set the desired shooting functions
using menus (pages 39 and 111). In
addition, you can select the shutter speed
(page 44).