92
Enable printer to connect
•
[USB Connect] is set to [PictBridge],
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
•
The connection is not established.
Disconnect and connect the cable for
multi-use terminal again. If an error
message is indicated on the printer, refer
to the operating instructions supplied
with the printer.
Connect to PictBridge device
•
You tried to print images before the
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
•
You tried to execute [DPOF image]
without placing a DPOF (Print order)
mark on the image(s).
•
You tried to execute [All In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
•
Check the printer.
Printer error
•
Check the printer.
•
Check if the image you want to print is
corrupted.
•
The data transmission to the printer may
not be completed yet. Do not disconnect
the cable for multi-use terminal.
Processing
•
The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.