Sony Cyber-Shot DSC-J10, Инструкция по эксплуатации

Страница: 10 / 80

GB
10
x
To retract the USB arm
Pull out the cable, and then lay the USB arm with finger. Then, the USB arm
cover closes.
• Do not push on the USB arm forcibly.
• Be careful not to pinch your finger in the USB arm.
• If the USB arm cover is closed, open the USB arm cover and lay the USB arm. Do
not push the USB arm when the USB arm cover is closed.
• Use a nearby wall outlet (wall socket) when using the supplied AC Adaptor.
Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any
malfunction occurs while using the camera.
• When charging is finished, disconnect the dedicated USB connection support
cable (supplied) from the computer, or the AC Adaptor from the wall outlet (wall
socket).
• Make sure to use the supplied AC adaptor or the supplied dedicated USB
connection support cable for charging.
• If the Power/Charge lamp does not light up even after connecting the AC adaptor
to the camera and the wall outlet (wall socket), the battery pack is in charging
standby condition as the ambient temperature is out of the appropriate range.
Charging starts and the lamp lights up when the ambient temperature becomes
appropriate for charging. Charging the battery pack in an ambient temperature of
10°C to 30°C (50°F to 86°F) is recommended.
x Charging the battery pack with a computer
You can charge the battery pack with the dedicated USB connection support
cable.
Notes