Sony CYBER-SHOT DSC-HX100, Руководство пользователя

Страница: 260 / 297

The camera is attempting to increase the visibility of the screen by temporarily brightening the
image under conditions of low illumination. There is no effect on the recorded image.
You can see a dark shadow on the image.
Depending on the brightness of the subject, you may see a dark shadow when you change
the aperture. This is not a malfunction.
The eyes of the subject come out red.
Set [Red Eye Reduction] to [Auto] or [On]. [Details]
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
Retouch the image using [Retouch] [Red Eye Correction] in viewing menu [Details] , or
correct using “PMB”.
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded.
Cannot shoot images in succession.
The internal memory or memory card is full. Delete unnecessary images. [Details] [Details]
The battery level is low. Insert a charged battery pack.
The same image is shot several times.
Set [Burst/Bracket] to [Single]. [Details]
[Scene Recognition] is set to [Advanced]. [Details]
The camera rattles when shaken.
This is the sound of internal parts of the lens barrel moving. This is not a malfunction.
The camera clicks when zoomed.
This is the sound of the ND filter moving into position or out of the way, when it is set to
[Auto]. This is not a malfunction.
The camera rattles during movie recording.
This is the sound of the camera iris adjusting the amount of light received, in response to
subject brightness. This is not a malfunction.
Back to top
Copyright 2011 Sony Corporation
260