DSC-HX10/HX10V_L2
1-14
Bias coma
Cabinet number
Cabinet
number
5
6
Match the bias coma with the cabinet number position, and insert the three projections of the 3 Lens Assy into the three
perpendicular grooves of the Liner Guide Tube B Lubricated.
Turn the Liner Guide Tube B Lubricated clockwise to the maximum.
7
8
Set the bias coma, the gear, and the cam groove inlet positions as shown in the figure, and insert the three projections
(inner diameter) of the 1 Lens Assy into the three cam grooves of the Cam Tube Lubricated Assy.
Match the bias coma with the perpendicular groove beside the cabinet number, and insert the three projections of the 1 lens Assy
into the three perpendicular grooves of the Liner Guide Tube A Assy.
Liner Guide Tube
B Lubricated
Liner Guide Tube
B Lubricated
Liner Guide Tube
B Lubricated
3 Lens Assy
Turn to the
maximum
Perpendicular
grooves
Projections
Press 3 Lens Assy
lightly with fingers
Bias coma
Bias coma
Gear
Cam groove
inlet positions
Projections
(Inner diameter)
perpendicular groove
(Inner diameter)
perpendicular
groove
(Inner
diameter)
Projections
1 lens Assy,
Barrier Assy,
Ornamental Ring (A)
1 lens Assy
Cam Tube
Lubricated Assy
Liner Guide
Tube A Assy
9
Turn the Liner Guide Tube A Assy clockwise to the maximum while holding the Cam Tube Lubricated Assy.
(When the Liner Guide Tube A Assy is turned fully, the 1 lens block is slightly extended as shown in the figure.)
1 lens block
1 lens block
Liner Guide
Tube A Assy
Cam Tube
Lubricated Assy
q;
qa
qs
Return the Liner Guide Tube A Assy a little so that the projections of the Liner Guide Tube A Assy come to the positions shown in
the figure.
Turn the Liner Guide Tube B Lubricated clockwise to a position a little before the position where the two projections of the Liner
Guide Tube B Lubricated align completely with the two projections of the Liner Guide Tube A Assy.
Note: Be careful so that the Liner Guide Tube B Lubricated is not ahead of the Liner Guide Tube A Assy.
While holding the two projections of the Liner Guide Tube B Lubricated and the two projections of the Liner Guide Tube A Assy to
prevent them from turning, turn the Cam Tube Lubricated Assy clockwise to the maximum to set the camera body in the retracted
state.
Cam Tube
Lubricated Assy
Projections of the
Liner Guide Tube A Assy
projections of the
Liner Guide Tube B Assy
Be careful so that the Liner Guide
Tube B Lubricated is not ahead of
the Liner Guide Tube A Assy.
