DSC-HX10/HX10V_L2
1-12
q;
qa
Turn the Naruto Gear jig counterclockwise to set the camera body in the retracted state.
Note: Turn the Naruto Gear jig to the maximum.
Remove the Main Unit from the Stationary Tube.
Naruto Gear
LKI
Stationary Tube
Main unit
qs
qd
Cam Tube
Lubricated Assy
Liner Guide
Tube A Assy
1 lens block
Liner Guide
Tube A Assy
2-3 lens block
While pressing the Cam Tube Lubricated Assy to prevent it from turning, turn the Liner Guide Tube A Assy clockwise
approx. 140 degrees to extend the 1 lens block.
Remove the 2-3 lens block from the Liner Guide Tube A Assy.
Projection of
Liner Guide Tube
A Assy
Projection of
Liner Guide Tube A Assy
140 degrees
140 degrees
qf
qg
While pressing the 3 Lens Assy lightly with fingers to prevent it from popping out, turn the Liner Guide Tube B Lubricated clockwise
to the maximum and remove the 3 Lens Assy from the Liner Guide Tube B Lubricated.
1 lens Assy,
Barrier Assy,
Ornamental Ring (A)
Liner Guide
Tube A Assy
Liner Guide Tube
B Lubricated
Liner Guide Tube
B Lubricated
Press 3 Lens Assy
lightly with fingers
Liner Guide Tube
B Lubricated
3 Assy Spring
Spring insertion
hole
3 Lens Assy
Remove the 1 Lens Assy, Barrier Assy, and Ornamental Ring A from the Liner Guide Tube A Assy.
Note:
Ornamental
Ring A
1 Lens Assy
Barrier Assy
Turn to the maximum
Turn to the maximum
Note
For removing the Ornamental Ring A
and the Barrier Assy, refer to "1-9.
ORNAMENTAL RING A OR BARRIER
ASSY REPLACING METHOD."
Note
Once the 3 Assy Spring is removed, it
is likely to come off the spring
insertion hole. In that case, do not
reuse the 3 Assy Spring.
For removing the Ornamental Ring A, Barrier Assy, and 1 Lens Assy, refer to "1-9. ORNAMENTAL RING A OR BARRIER
ASSY REPLACING METHOD."