CX-JDS22/JDS33
General
Power requirements
Mexican model:
127 V AC, 60 Hz
Other models:
120 V, 220 – 230 V or
240 V AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
JDS33:
245 watts
JDS22:
198 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 230
×
365.5
×
409 mm
Mass (excl. speakers)
Approx. 9.1 kg
Design and specifications are subject to change
without notice.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40
°
C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
• Abbreviation
E51
: Chilean and Peruvian models
MX
: Mexican model
Model
Part No.
E51 model (JDS33)
2-675-711-0
[]
MX model (JDS33)
2-675-712-0
[]
E51 model (JDS22)
2-675-714-0
[]
MX model (JDS22)
2-675-715-0
[]
MODEL IDENTIFICATION
– BACK PANEL –
3
#
#
3
Part No.
All manuals and user guides at all-guides.com