7
CNA-1 Configuration
Your system participates in CNS as one of Sony camera
CNA-1 setup
For details of the following setting items, see “Operation Manual (page 17).
”
Device No. Configuration for CNA-1
In this case, Device number of CNA-1 must be set to different number from CCUs connected to the network. CNA-1 will be
recognized as one of camera and CNA-1’s Device number is handled as CCU number in CNS.
CNA-1’s Device number is set to (3). Therefore, MSU can find CNA-1 as Camera (3) and also RCP (3) can control CNA-1 as
Camera (3).
CNS Configuration
CNS Mode
MCS
Master Mode
Disable
Master IP Address
Master MSU’s IP address
Target IP Address
Variable
Device No.
Depends on CCUs connected
to the network.
Gateway Configuration
Gateway Mode
Enable
Emulation Mode
CAM
CNA-1
Device No. (3)
Your system work
as camera
Network hub
CCU (1)
MCS mode: Client
CCU No. (1)
Camera head
CCU (2)
MCS mode: Client
CCU No. (2)
Camera head
RCP (1)
MCS mode: Client
RCP No. (1)
MSU
MCS mode: Master
RCP (2)
MCS mode: Client
RCP No. (2)
RCP (3)
MCS mode: Client
RCP No. (3)
