background image

CMT-BX1.GB.3-095-504-12(1)

Other Operations

Creating your own program 

(Program Play)

Press CD 

 to select the CD function.

Press PLAY MODE 

 repeatedly until “PGM” appears 

while the player is stopped.

Press 

/

 

 repeatedly until the desired 

track or file number appears.

When programming files, press   +/

 

 repeatedly 

to select the desired folder, and then select the desired 

file.

Total playing time of program (including 

selected track or file)

Selected track or file 

number

Press ENTER 

 to add the track or file to the 

program.

 

.

 

” appears when the total program time 

exceeds 100 minutes for a CD, or when you select a 

CD track whose number is 21 or over, or when you 

select an MP3 file.

Repeat steps 3 through 4 to program additional 

tracks or files, up to a total of 25 tracks or files.

To play your program of tracks or files, press 

 

.

The program remains available until you open the disc 

tray. To play the same program again, press 

 

.

To cancel Program Play

Press PLAY MODE 

 repeatedly until “PGM” 

disappears while the player is stopped.

To delete the last track or file of the program

Press CLEAR 

 on the remote while the player is 

stopped.

Presetting radio stations

You can preset your favorite radio stations and tune 

them in instantly by selecting the corresponding preset 

number.

Use buttons on the remote to preset stations.

Tune in the desired station (See 

Listening to the 

radio

).

Press TUNER MEMORY 

.

Preset number

Press +/

 

 repeatedly to select your desired 

preset number.

If another station is already assigned to the selected 

preset number, the station is replaced by the new 

stations.

Press ENTER 

.

Repeat steps 1 through 4 to store other stations.

You can preset up to 20 FM and 10 AM stations. The 

preset stations are retained for about half a day even 

if you disconnect the power cord or if a power failure 

occurs.

To call up a preset radio station, press TUNING 

MODE 

 repeatedly until “PRESET” appears, and 

then press +/

 

 repeatedly to select the desired 

preset number.

Using the Timers

The system offers two timer functions. If you use the Play 

Timer with the Sleep Timer, the Sleep Timer has priority. 

Sleep Timer:

You can fall asleep to music. This function works even if 

the clock is not set.

Press SLEEP 

 repeatedly. If you select “AUTO,” the 

system automatically turns off after the current disc stops 

or in 100 minutes.

Play Timer:

You can wake up to CD or tuner at a preset time. 
Use buttons on the remote to control the Play Timer. 

Make sure you have set the clock.

Prepare the sound source.

Prepare the sound source, and then press VOLUME 

+/

 

 to adjust the volume. 

To start from a specific track or file, create your own 

program.

Press CLOCK/TIMER SET 

.

Press 

/

 

 repeatedly to select “PLAY SET,” 

and then press ENTER 

.

“ON” appears, and the hour indication flashes.

Set the time to start playing.

  Press 

/

 

 repeatedly to set the hour, and 

then press ENTER 

.

The minute indication flashes. Use the procedure 

above to set the minutes.

Use the same procedure as in step 4 to set the time 

to stop playing.

Select the sound source.

Press 

/

 

 repeatedly until the desired 

sound source appears, and then press ENTER 

. The 

display shows the timer settings.

Press 



 

 to turn off the system.

The system turns on 15 seconds before the preset time. 

If the system is on at the preset time, the Play Timer 

will not play.

To activate or check the timer again

Press CLOCK/TIMER SELECT 

, press 

/

 

 repeatedly until “PLAY SEL” appears, and then press 

ENTER 

.

To cancel the timer

Repeat the same procedure as above until “TIMER OFF” 

appears, and then press ENTER 

.

To change the setting

Start over from step 1.

Tip

The Play Timer setting remains as long as the setting is not canceled 

manually.

Make sure the power cord and speaker cords are 

correctly and firmly connected.

Find your problem in the checklist below, and take 

the indicated corrective action.

If the issue persists, contact your nearest Sony dealer.

If the STANDBY indicator flashes

Immediately unplug the power cord, and check the 

following items.

 If your system has a voltage selector, is the voltage 

selector set to the correct voltage?

 Are you using only the supplied speakers?

 Is anything blocking the ventilation holes on the top 

or back of the system?

After the STANDBY indicator 

 stops flashing, 

reconnect the power cord, and turn on the system. If 

the issue persists, contact your nearest Sony dealer.

General

Sound comes from one channel, or the left and 

right volumes are unbalanced.

 Place the speakers as symmetrically as possible.

 Connect only the supplied speakers.

Severe hum or noise.

 Move the system away from sources of noise.

 Connect the system to a different wall socket.

 Install a noise filter (available separately) to the power 

cord.

The remote does not function.

 Remove any obstacles between the remote and the 

remote sensor 

 on the unit, and position the unit 

away from fluorescent lights.

 Point the remote at the system’s sensor.

 Move the remote closer to the system.

CD/MP3 player

The sound skips, or the disc will not play.

 Wipe the disc clean, and replace it.

 Move the system to a location away from vibration (for 

example, on top of a stable stand).

 Move the speakers away from the system, or place them 

on separate stands. At high volume, speaker vibration 

may cause the sound to skip.

Play does not start from the first track.

 Press PLAY MODE 

 repeatedly until both “PGM” 

and “SHUF” disappear to return to normal play.

Starting playback takes more time than usual.

 The following discs take a longer time to start playback.

 a disc recorded with a complicated tree structure.

 a disc recorded in multisession mode.

 a disc that has not been finalized (a disc to which data 

can be added).

 a disc that has many folders.

Tuner

Severe hum or noise, or stations cannot be 

received. (“TUNED” or “ST” flashes on the 

display.)

 Connect the antenna properly.

 Find a location and an orientation that provide good 

reception, and then set up the antenna again.

 Keep the antenna away from the speaker cords and the 

power cord to avoid picking up noise.

 Connect a commercially available external antenna.

 Consult your nearest Sony dealer if the supplied AM 

antenna has come off the plastic stand.

 Turn off nearby electrical equipment.

To change the AM tuning interval

The AM tuning interval is factory-preset to 9 kHz (or 

10 kHz, for some areas).

Use buttons on the unit to change the AM tuning 

interval.

Tune in any AM station, and then turn off the 

system. 

While holding down TUNER/BAND 

, press 



 

All the AM preset stations are erased. To reset the 

interval to the factory preset, repeat the procedure.

To improve tuner reception

Turn off CD player power by using the CD power 

management function. By default, CD power is turned on.

Press FUNCTION 

 repeatedly to select the CD 

function, and then turn off the system.

After “STANDBY” stops flashing, press 



 

 on the 

unit while holding down 

/CANCEL 

 on the unit. 

“CD POWER OFF” appears. With CD player power 

turned off, disc access time is increased. To turn on 

CD player power, repeat the procedure until “CD 

POWER ON” appears.

To reset the system to factory settings

If the system still does not operate properly, reset the 

system to factory settings.

Use buttons on the unit to reset the unit to its factory 

default settings.

Disconnect and reconnect the power cord, and then 

turn on the system.

Press 

 

 

/CANCEL 

 and 



 

 at the 

same time.

All user-configured settings, such as preset radio 

stations, timer, and the clock, are deleted.

Troubleshooting

Messages

CD OVER:

 You have reached the end of the disc while 

pressing 

 

 during playback or pause.

COMPLETE:

 The preset operation ended normally.

INVALID:

 You pressed an invalid button.

LOCKED:

 The disc tray does not open. Contact your 

nearest Sony dealer.

NO DISC:

 There is no disc in the system, or you have 

loaded a disc that cannot be played.

NO STEP:

 All of the programmed tracks or files have 

been erased.

PUSH SELECT:

 You tried to set the clock or timer during 

timer operation.

PUSH STOP:

 You pressed PLAY MODE 

 during 

playback.

READING:

 The system is reading information of the disc. 

Some buttons are not available.

SET CLOCK:

 You tried to select the timer when the clock 

is not set.

SET TIMER:

 You tried to select the timer when the Play 

Timer is not set.

STEP FULL:

 You tried to program more than 26 tracks or 

files (steps).

TIME NG:

 The Play Timer start and end times are set to 

the same time.

Display examples

Display

indicates

2 (two)
5 (five)
6 (six)
8 (eight)
0 (zero)
A
B
D
G
H
K
M
O
Q
R
S
Z
|

$
%
,
.
?
@
^

Precautions

Discs that this system CAN play

 Audio CD

 CD-R/CD-RW (audio data/MP3 files)

Discs that this system CANNOT play

 CD-ROM

 CD-R/CD-RW other than those recorded in music CD 

format or MP3 format conforming to ISO9660 Level 

1/Level 2, Joliet or multisession

 CD-R/CD-RW recorded in multisession that have not 

ended by “closing the session”

 CD-R/CD-RW of poor recording quality, CD-R/CD-

RW that have scratches or are dirty, or CD-R/CD-RW 

recorded with an incompatible recording device

 CD-R/CD-RW which is finalized incorrectly

 Discs containing files other than MPEG 1 Audio Layer-

3 (MP3) files

 Discs of non-standard shape (for example, heart, 

square, star)

 Discs that have adhesive tape, paper, or sticker attached 

to them

 Rental or used discs with attached seals where the glue 

extends beyond the seal

 Discs that have labels printed using ink that feels tacky 

when touched

Notes on discs

 Before playing, wipe the disc with a cleaning cloth from 

the center out to the edge.

 Do not clean discs with solvents, such as benzine 

thinner, or commercially available cleaners or anti-

static spray intended for vinyl LPs.

 Do not expose discs to direct sunlight or heat sources 

such as hot air ducts, nor leave it in a car parked in 

direct sunlight.

On safety

 Completely disconnect the power cord (mains lead) 

from the wall socket (mains) if it is not going to be used 

for an extended period of time. When unplugging the 

unit, always grip the plug. Never pull the cord itself.

 Should any solid object or liquid get into the system, 

unplug the system, and have it checked by qualified 

personnel before operating it again.

 The AC power cord can be changed only by a qualified 

service facility.

On placement

 Do not place the system in an inclined position or in 

locations that are extremely hot, cold, dusty, dirty, or 

humid or lacking adequate ventilation, or subject to 

vibration, direct sunlight or a bright light.

 Be careful when placing the unit or speakers on 

surfaces that have been specially treated (for example, 

with wax, oil, polish) as staining or discoloration of the 

surface may result.

 If the system is brought directly from a cold to a warm 

location or is placed in a very damp room, moisture 

may condense on the lens inside the CD player, and 

cause the system to malfunction. In this situation, 

remove the disc, and leave the system turned on for 

about an hour until the moisture evaporates.

On heat buildup

 Heat buildup on the unit during operation is normal 

and is not cause for alarm.

 Do not touch the cabinet if it has been used 

continuously at a high volume because the cabinet may 

have become hot. 

 Do not obstruct the ventilation holes.

On the speaker system

This speaker system is not magnetically shielded, and 

the picture on nearby TV sets may become magnetically 

distorted. In this situation, turn off the TV, wait 15 to 30 

minutes, and turn it back on. 

If there is no improvement, move the speakers far away 

from the TV.

Cleaning the cabinet

Clean this system with a soft cloth slightly moistened 

with a mild detergent solution. Do not use any type 

of abrasive pad, scouring powder, or solvent, such as 

thinner, benzine, or alcohol.

Specifications

Main unit

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6 ohm loads, both channels driven, from 120 

 10,000Hz; rated 12 watts 

per channel minimum RMS power, with no more than 10% total harmonic 

distortion from 250 milliwatts to rated output.

Amplifier section

Continuous RMS power output (reference): 15 + 15 W (6 ohms at 1 kHz, 

10% THD)

Inputs

AUDIO IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms

Outputs

PHONES (stereo mini jack): accepts headphones of 8 ohms or more

SPEAKER: accepts impedance of 6 to 16 ohms

CD player section

System: Compact disc and digital audio system

Laser Diode Properties

Emission duration: continuous

Laser Output*: Less than 44.6µW

* This output is the value measurement at a distance of 200mm from the 

objective lens surface on the Optical Pick-up Block with 7mm aperture.

Frequency response: 20 Hz 

 20 kHz

Signal-to-noise ratio: More than 90 dB

Dynamic range: More than 90 dB

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section:

Tuning range: 87.5 

 108.0 MHz (100 kHz step)

Antenna: FM lead antenna

Antenna terminals: 75 ohms unbalanced

Intermediate frequency: 10.7 MHz

AM tuner section:

Tuning range: 530 

 1,710 kHz (with 10 kHz tuning interval)

 

531 

 1,710 kHz (with 9 kHz tuning interval)

Antenna: AM loop antenna, external antenna terminal

Intermediate frequency: 450 kHz

Speaker

Speaker system: Full Range, 10 cm, cone type

Nominal impedance: 6 ohms

Dimensions (w/h/d): Approx. 140 × 245 × 135 mm

Mass: Approx. 1.5 kg net per speaker

General

Power requirements: 120 V AC, 60 Hz

Power consumption: 40 watts

Dimensions (w/h/d) (excl. speakers): Approx. 200 × 132 × 298 mm

Mass (excl. speakers): Approx. 3.4 kg
Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/AM 

loop antenna (1)/FM lead antenna (1)
Design and specifications are subject to change without notice.

 

 Standby power consumption: 0.5 W

 Halogenated flame retardants are not used in the 

certain printed wiring boards.

Содержание CMTBX1 - CMT BX1 Micro System













Отзывы: