Sony CMT-X7CD, Руководство по эксплуатации, Страница: 30 / 56

30 GB
1
Prepare the sound source.
2
Press TIMER.
3
Press

/

to select “PLAY SET,”
then press .
The start time flashes in the display
window.
4
Press

/

to select time, then
press .
Follow the same procedure to set
“MINUTE” of the time to start operation,
then “HOUR” and “MINUTE” of the time
to stop the operation.
5
Press

/

to select the desired
sound source, then press .
The confirmation display for the Play
Timer appears.
6
Press

/

to turn off the system.
Tip

Before the preset time, the system automatically
turns on.

for FM or DAB*: about 15 seconds before the
preset time

for a CD or USB device: about 90 seconds
before the preset time

When the sound source is a CD, you can
preprogram the Play Timer. See “Creating your
own program (Program Play)” (page 11).

When the sound source is radio, make sure to
tune-in the radio station in advance (page 13).

To change the timer setting, perform the
procedures from the beginning again.
* DAB is for CMT-X7CDB only.
Note

The Play Timer does not work if the system is
already on at the preset time. Be careful not to
operate the system until it is turned on and
starts play with the timer.

When the sound source for a Play Timer is set to
a radio station that you set using Automatic
Scanning (AUTO) or Manual Tuning (MANUAL),
and you change the radio frequency or band
after setting the timer, the radio station setting
for the timer will also be changed.

When the sound source for a Play Timer is set to
a radio station tuned from a preset radio station,
and you change the frequency of the radio
station or band after setting the timer, the radio
station setting for the timer will not change. The
radio station tuning for the timer is fixed at the
frequency you set.
To check the setting
1
Press TIMER.
2
Press

/

to select “SELECT,” then press
.
3
Press

/

to select “PLAY SEL,” and then
press .
The timer setting appears in the display
window.
To cancel the timer
After step 2 on “To check the setting”
(page 30), select “OFF,” then press
.