Sony CMT-SP55TC Скачать руководство пользователя страница 40

Страница: 40 / 44

Troubleshooting (continued)

A stereo FM programme cannot be
received in stereo.

• Press STEREO/MONO on the remote until

“STEREO” appears in the display.

• See “Severe hum or noise/stations cannot be

received.”, and check the aerial condition.

Tape Deck

The cassette tray does not close.

• Turn on the power again, and close the

cassette tray.

The tape does not record.

• No cassette is inserted. Insert a cassette.
• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape (see
page 38).

• The tape has wound to the end.

The tape does not record or play, or there
is a decrease in sound level.

• The heads are dirty. Clean them.
• There is slack in the tape. Take up any slack

in the tape.

• The record/playback heads are magnetised.

Demagnetise them (see page 38).

The tape does not erase completely.

• The record/playback heads are magnetised.

Demagnetise them (see page 38).

There is excessive wow or flutter, or the
sound drops out.

• The capstans or pinch rollers in the tape deck

are dirty. Clean them using a cleaning cassette
(see page 38).

Noise increases or the high frequencies
are erased.

• The record/playback heads are magnetised.

Demagnetise them (see page 38).

The sound skips.

• Wipe the CD clean (see page 37).
• Replace the CD.
• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the

system, or placing them on separate stands.
When you listen to a track with bass sounds at
high volume, the speaker vibration may cause
the sound to skip.

Play does not start from the first track.

• Press PLAY MODE repeatedly until

“PROGRAM” or “SHUFFLE” disappears to
return to normal play.

“- OVER -” appears.

• Keep pressing

or press

repeatedly on the CD player to return to the
desired playing position.

Tuner

Severe hum or noise/stations cannot be
received.

• Set the proper band and frequency (see

page 24).

• Connect the aerial properly (see page 6).
• Find a place and an orientation that provide

good reception, then set up the aerial again.
If you cannot obtain good reception, we
recommend you connect a commercially
available external aerial.

• The supplied FM lead aerial receives signals

along its entire length, so make sure you
extend it fully.

• Locate the aerials as far away from the

speaker cords as possible.

• Consult your nearest Sony dealer if the

supplied AM aerial has come off the plastic
stand.

• Try turning off surrounding electrical

equipments.

Содержание CMT-SP55TC













































Результаты поиска

Содержание CMT-SP55TC

Отзывы:

Похожие инструкции для CMT-SP55TC

Бренды по названию

Популярные бренды

Sony CMT-SP55TC, Руководство по эксплуатации

Результаты поиска

Содержание CMT-SP55TC

Отзывы:

Похожие инструкции для CMT-SP55TC

Бренды по названию

Популярные бренды