23
The Tape Deck
3
Press TUNING MODE repeatedly until
“PRESET” appears.
4
Press or – to select the
desired preset station.
To preset radio stations, see page 24.
Preset number and frequency (or station
name
*
or RDS station name
**
)
* The station name appears only if you have
labelled the station (see page 27).
** European model only.
5
Press
z
REC.
The
z
REC indicator lights up.
The tape deck stands by for recording.
6
Press
H
on the tape deck to record
starting from the front side.
To record from the reverse side, press
h
on the tape deck.
7
Press DIRECTION repeatedly until
g
appears to record on one side or
h
(or
j
) to record on both sides.
If you select both sides recording and the
tape reaches the end of the front side part-
way through a track, the entire track is
recorded again from the beginning of the
reverse side. When you start recording from
the reverse side, the recording stops at the
end of the reverse side even though you
select
h
.
8
Press
S
on the tape deck.
Recording starts.
To
Do this
Stop recording
Press
s
on the tape deck.
Pause
Press
S
on the tape deck.
Press
S
again or
H
on the
tape deck to restart recording.
Remove the tape
Press
A
on the tape deck in
stop mode.
Tips
• If noise is heard while recording an AM radio
programme, move the AM loop aerial to reduce the
noise or connect a ground wire to the
U
terminal
(see page 36).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in high-
frequency signals recorded at low level, press
DOLBY NR after step 7 so “DOLBY NR” appears
in the display. Turning DOLBY NR on reduces the
noise when playing back these types of signals.
