20
4-5-1. Operating the Continuous Playback Mode
1. Entering the continuous playback mode
1
Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.)
2
Rotate the
l L
knob (MD) and display “MD CPLAY MODE”.
3
Press the ENTER/YES button (MD) to change the display to “MD CPLAY MID”.
4
When access completes, the display changes to “MD C =
AD =
”.
Note :
The numbers “ ” displayed show you error rates and ADER.
2. Changing the parts to be played back
1
Press the ENTER/YES button (MD) during continuous playback to change the display as below.
When pressed another time, the parts to be played back can be moved.
2
When access completes, the display changes to “MD C =
AD =
”.
Note :
The numbers “ ” displayed show you error rates and ADER.
3. Ending the continuous playback mode
1
Press the MENU/NO button (MD). The display will change to “MD CPLAY MODE”.
2
Press the
A
button (MD) to remove the disc.
Note :
The playback start addresses for IN, MID, and OUT are as follows.
IN
40h cluster
MID 300h cluster
OUT 700h cluster
4-5-2. Operating the Continuous Recording Mode (Use only when performing self-recording/palyback check.)
1. Entering the continuous recording mode
1
Set a recordable disc in the unit.
2
Rotate the
l L
knob (MD) and display “MD CREC MODE”.
3
Press the ENTER/YES button (MD) to change the display to “MD CREC MID”.
4
When access completes, the display changes to “MD CREC (
)”.
Note :
The numbers “ ” displayed shows you the recording position addresses.
2. Changing the parts to be recorded
1
When the ENTER/YES button (MD) is pressed during continuous recording, the display changes as below.
When pressed another time, the parts to be recorded can be changed.
2
When access completes, the display changes to “MD CREC (
)”.
Note :
The numbers “ ” displayed shows you the recording position addresses.
3. Ending the continuous recording mode
1
Press the MENU/NO button (MD). The display changes to “MD CREC MODE”.
2
Press the
A
button (MD) to remove the disc.
Note 1 :
The recording start addresses for IN, MID, and OUT are as follows.
IN
40h cluster
MID
300h cluster
OUT
700h cluster
Note 2 :
The MENU/NO button (MD) can be used to stop recording anytime.
Note 3 :
Do not perform continuous recording for long periods of time above 5 minutes.
Note 4 :
During continuous recording, be careful not to apply vibration.
4-5-3. Non-Volatile Memory Mode (EEP MODE)
This mode reads and writes the contents of the non-volatile memory.
It is not used in servicing. If set accidentally, press the MENU/NO button (MD) immediately to exit it.
“MD CPLAY MID”
t
“MD CPLAY OUT”
t
“MD CPLAY IN”
“MD CPLAY MID”
t
“MD CPLAY OUT”
t
“MD CPLAY IN”
