Op
tio
n
a
l P
e
rs
on
al
Comp
ute
r
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB12OPT-CEK.fm]
75
GB
model name [CMT-SE7]
[4-248-325-11(2)]
When you connect a personal computer
for the first time, use the supplied
CD-ROM and install the software in the
computer before connecting the
supplied USB cable. See the supplied
single page flyer for a simple
explanation of how to install the
software. Next, remove the label
covering this system's USB jack and
connect your computer to this system
using the supplied USB cable.
You can use this system’s speakers to listen to
songs played back from your computer's hard
disk or CD-ROM drive. You can also use the
installed M-crew software to control this system
from your computer, or use the installed
SonicStage for Sony Net MDs to transfer music
data stored on your computer to MD.
Notes
• Be sure to use the dedicated software (M-crew or
SonicStage for Sony Net MDs) supplied with this
system.
• When you connect the supplied USB cable to your
computer, a driver installation may start
automatically. If a “File required” dialog box or other
dialog box appears, reinstall the device driver.
• Disconnecting the USB cable is recommended while
it is not in use.
• Even if you adjust the volume on the computer side,
the system volume cannot be adjusted.
• When you connect the USB cable, the sound output
destination switches from the computer to the
system. To return the output destination to the
computer, stop the track being played by the
computer and disconnect the USB cable. To listen to
a track stored on your computer with the system, the
system must be set to the PC function.
• Operation is not guaranteed when using other than
the supplied USB cable or when extending the cable
with an extension connector, etc.
Optional Personal Computer
Connecting a personal
computer to the system
Personal computer
To the USB port on
a computer
Supplied
USB cable
To the USB port