Sony CMT-SE7 Скачать руководство пользователя страница 63

Страница: 63 / 104

Tu
n

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB10TUN-CEK.fm]

model name [CMT-SE7]

[4-248-325-11(2)]

Press ENTER/YES.

“Complete!” appears.

Repeat steps 1 through 7 to store other
stations.

Other operations

To improve tuner reception

When tuner reception is poor, set DVD player
power off by DVD power manage function.
DVD power is factory set to on.

Press SA-CD/DVD.

Press

?/1

to turn off the system.

Press

?/1

on the unit while pushing the

DVD stick towards

. “DVD POWER OFF”

appears.

To set DVD power on

Repeat the procedure above and “DVD POWER
ON” appears.

Notes

• When “DVD POWER OFF” is selected, DVD access

time is increased.

• You cannot change the setting in Power Saving

Mode.

Tips

• The preset stations are retained for about a day even

if you disconnect the mains lead or if a power failure
occurs.

• You can label the preset stations “Labelling the

preset stations” (page 65).

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

• To confirm the content of displayed messages, open

the lid on the unit when “OPEN” is displayed.

• To operate the unit with the lid closed, perform step

2 in “Manual tuning preset” to display “Manual”.

To change the AM tuning interval

The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding
FUNCTION, press

?/1

. When you change the

interval, all the AM preset stations are erased.
To reset the interval, repeat the same procedure.
Use buttons on the unit for the operation.

Tips

• The preset stations are retained for half a day even if

you disconnect the mains load or if a power failure
occurs.

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

Do this

Tune in a station
with a weak signal

Follow the procedure described
in “Manual tuning preset”.

Set another station
to the existing
preset number

Start over from step 1. After
step 5, press

(or move

TUNER stick on the unit to + or
–) repeatedly to select the preset
number you want to store the
other station.

Содержание CMT-SE7









































































































Результаты поиска

Содержание CMT-SE7

Отзывы:

Бренды по названию

Популярные бренды

Sony CMT-SE7, Руководство по эксплуатации

Результаты поиска

Содержание CMT-SE7

Отзывы:

Бренды по названию

Популярные бренды