6
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system is used for illustration
purposes.
>
M
m
N
X
x
?/1
.
2
1
4,6
4
3,5
DISPLAY
m
1
Turn on the system.
2
Press CLOCK/TIMER SET.
The clock appears and the hour indication
flashes.
0 : 0 0
3
Press
.
/
>
to set the hour.
4
Press ENTER or
M
.
The minute indication flashes.
1 1 : 0 0
5
Press
.
/
>
to set the minute.
6
Press ENTER.
The clock starts.
If you made a mistake
Press
m
/
M
repeatedly until the incorrect item
flashes, then set it again.
To change the preset time
You can change the preset time while the system
is off.
1
Press DISPLAY to display the clock.
2
Press CLOCK/TIMER SET.
3
Repeat steps 3 to 6 of “Setting the time.”
Tips
• The upper dot of the colon flashes for the first 30
seconds, and the lower dot flashes for the last 30
seconds of each minute.
• Each time you press DISPLAY while the system is
off, the display switches between no display and the
clock display.
