![background image](http://html.mh-extra.com/html/sony/cmt-m90dvd-micro-hi-fi-component-system/cmt-m90dvd-micro-hi-fi-component-system_operating-instructions-manual_420408049.webp)
49
GB
Troubleshooting
continued
Tape Deck
The tape does not record or play, or there is a
decrease in sound level.
• The heads are dirty. Clean them.
• The record/playback heads are magnetised.
Demagnetise them (see page 52).
The tape does not erase completely.
• The record/playback heads are magnetised.
Demagnetise them (see page 52).
There is excessive wow or flutter, or the sound
drops out.
• The capstans in the tape deck are dirty. Clean
them using a cleaning cassette (see page 52).
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetised.
Demagnetise them (see page 52).
The tape does not record.
• No cassette is loaded. Load a cassette.
• The tab has been removed from the cassette.
Cover the broken tab with adhesive tape (see
page 52).
• The tape has wound to the end.
Optional components
There is no sound.
• Refer to General item “There is no sound.” on
page 47 and check the condition of the system.
• Connect the component properly (see page 45)
while checking:
– if the cords are connected properly.
– if the cord plugs are firmly inserted all the way.
• Turn on the connected component.
• Refer to the operating instructions supplied with
the connected component and start playing.
The sound is distorted.
• Set the volume of the connected component
lower.
The sound from the component connected to the
AUDIO IN MD (VIDEO) jacks is distorted.
• If “VIDEO” appears when you press
FUNCTION repeatedly, switch the function to
“MD” (see the tip for “Listening to audio from a
connected component” on page 46).
Tuner
Severe hum or noise/stations cannot be
received.
• Set the proper band and frequency (see page 33).
• Connect the antenna properly (see page 9).
• Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend
you connect a commercially available external
antenna.
• The supplied FM lead antenna receives signals
along its entire length, so make sure you extend
it fully.
• Locate the antennas as far away from the speaker
cords as possible.
• Consult your nearest Sony dealer if the supplied
AM antenna has come off the plastic stand.
• Try turning off surrounding electrical
equipments.
A stereo FM program cannot be received in
stereo.
• Press REPEAT/FM MODE until “STEREO”
appears in the display.
If the system still does not operate
properly after performing the above
measures, reset the system as
follows:
1
Disconnect the mains lead.
2
Reconnect the mains lead.
3
Press
?/1
to turn on the system.
4
Press
?/1
while pressing
x
and
z
REC.
The system is reset to the factory settings
except for DVD settings. You should set the
settings you made, such as the preset stations,
clock, and timer.
To reset the DVD settings, select “RESET” in
step 3 of “Using the Setup Display” (page 19).
After you select “RESET” and press ENTER,
select “YES”, then press ENTER to reset the
settings (it takes a few seconds to complete).
Do not press
?/1
when resetting the system.
Содержание CMT-M90DVD - Micro Hi Fi Component System
Страница 60: ...60GBSony Corporation Printed in Korea ...