9
GB
CMT-M70 4-239-398-
11
(1) GB
CD/Tuner
Programming the CD
tracks
–– Program Play
You can make a program of up to 24 tracks on
a CD in any order that you want.
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Press PLAY MODE/TUNING MODE (or
TUNING MODE/PLAY MODE on the
remote) repeatedly until “PGM”
appears in the display.
3
Press
l/L
(or
./>
on the
remote) repeatedly until the desired
track number appears in the display.
4
Press PLAY MODE/TUNING MODE (or
TUNING MODE/PLAY MODE on the
remote).
The selected track is programmed.
The selection number appears in the
display.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press CD
N
.
To
Cancel Program Play
Add a track to the end
of the program
Erase the entire
program
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press CD
N
.
• “--.--” appears in the display when the total program
time exceeds 100 minutes.
Selected track
number
Total playing time
Do this
Press PLAY MODE/
TUNING MODE (or
TUNING MODE/PLAY
MODE on the remote)
repeatedly until “PGM”
disappears from the display.
Do steps 3 and 4 with
Program Play stopped.
Press
x
with Program Play
stopped.
Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10
AM stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
There are two ways to store the station presets.
To
Automatically tune
all of the stations
that can be received
in your area and then
store them manually
Manually tune and store
the radio frequency of
your favorite stations
Setting presets through
automatic tuning
1
Press FUNCTION repeatedly until
“TUNER” appears in the display.
2
Press TUNER FM or TUNER AM (or
TUNER/BAND on the remote) to select
FM or AM.
3
Press PLAY MODE/TUNING MODE (or
TUNING MODE/PLAY MODE on the
remote) repeatedly until “AUTO”
appears in the display.
4
Press /– (or
m/M
on the
remote).
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 3 through 7 of
“Setting presets through manual tuning”.
Method
Automatic Tuning Preset
Manual Tuning Preset
continued
3 243
PGM
