6
Step 2: Setting the time
You must set the time before you can use the
timer functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system model is used for illustration
purpose.
Set the time before turning the power on.
DISPLAY
2,3,4
1
2,3,4
1
Press TIMER SET while the power is
off.
The day indication flashes after “CLOCK
SET” flashing.
2
Press +/– to set the day then press
ENTER.
The hour indication flashes.
3
Press +/– to set the hour then press
ENTER.
The minute indication flashes.
4
Press +/– to set the minute then press
ENTER.
The clock starts.
To change the time
You can change the preset time while the power is
on.
1
Press TIMER SET.
2
Press +/– repeatedly until “CLOCK SET”
appears then press ENTER.
3
Repeat steps 2 to 4.
To show the time
You can display the clock any time.
Press DISPLAY repeatedly until the clock display
appears.
Tips
• If you have made a mistake, start over from step 1.
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).