5
Getting Started
3
Connect the AM antenna.
Set up the AM loop antenna, then connect it.
Connect the white cord to the
U
terminal,
and the red cord to the other terminal.
Note
Keep the antenna away from the speaker cords to
prevent noise.
4
Reinstall the rear cover.
Put the wires through the hole at the bottom
of the rear cover.
5
Connect the AC power cord to a wall
outlet after you complete all the
connections.
Note on the glass cover of CD
player
The CD player cover is made of tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more weight
than ordinary glass. This glass, however, may
shatter if it receives a sharp blow or if it is
scratched.
To level the speakers
Attach the supplied speaker legs to the rear of the
speaker bottoms to level the speakers.
Inserting two R6 (size AA)
batteries into the remote
E
E
e
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
To connect optional component
See “Optional Components” on page 20.
AM loop
antenna
