background image

18

GB

Should you encounter a problem with your 
system, do the following:

1

Make sure the power cord and speaker 
cords are correctly and firmly connected.

2

Find your problem in the troubleshooting 
checklist below and take the indicated 
corrective action.

If the problem persists after doing all of the 
above, consult your nearest Sony dealer.

General

The display or button remains lighted or 
flashes even after the system was turned off.

• Press DISPLAY repeatedly until the clock display 

appears.

The clock indication does not show the 
correct time.

• A power interruption has occurred. Set the clock 

(page 5) and timer settings (pages 14 and 15) 
again.

The clock setting/radio presetting/timer is 
canceled.

• The power cord is disconnected or a power failure 

occurs longer than half a day.
Redo the following:

– “Setting the clock” (page 5)

– “Presetting radio stations” (page 8)

If you have set the timer, also redo “Waking up to 
music” (page 14)
 and “Timer recording radio 
programs” (page 15).

There is no sound.

• Press VOL + repeatedly (or turn VOLUME on the 

unit clockwise).

• Make sure the headphones are not connected.

• Insert only the stripped portion of the speaker cord 

into the SPEAKER terminal. Inserting the vinyl 
portion of the speaker cord will obstruct the 
speaker connections (page 4).

Sound comes from one channel, or 
unbalanced left and right volume.

• Check the speaker connection and speaker 

placement.

Sound lacks bass.

• Check that the speaker’s + and – terminals are 

connected correctly.

There is severe hum or noise.

• A TV or VCR is placed too close to the stereo 

system. Move the stereo system away from the TV 
or VCR.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to 

the power line. 

The timer cannot be set.

• Set the clock correctly (page 5).

The timer does not function.

• Check the timer setting and set the correct time 

(pages 14 and 15).

• Cancel the Sleep Timer function (page 13).

• You cannot activate the timer recording and Daily 

Timer at the same time.

The remote does not function.

• Remove the obstacle.

• Move the remote closer to the system.

• Point the remote at the system’s sensor.

• Replace the batteries (R6/size AA).

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15 

to 30 minutes. If the color irregularity still 
persists, place the speakers farther away from the 
TV set.

CD player

The CD compartment does not close.

• Place the disc correctly.

The sound drops out.

• The lens is dirty. Clean it with a commercially 

available blower.

Play does not start.

• Open the lid of the CD compartment and check 

whether a disc is loaded.

• Wipe the disc clean (page 21).

• Replace the disc.

• Place the disc that this system can play.

• Place the disc correctly.

• Place the disc in the tray with the label side up.

• Remove the disc and wipe away the moisture on 

the disc, then leave the system turned on for about 
an hour until the moisture evaporates.

• Press  CD 

N

 to start play.

Troubleshooting

Problems and remedies

Содержание CMT-EP515 - Micro Hi Fi Component System





























Отзывы: