![background image](http://html.mh-extra.com/html/sony/cmt-c7nt/cmt-c7nt_operating-instructions-manual_420278041.webp)
41
MD — Editing
Fade-in and Fade-out
Recording
1
Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2
Press PLAY MODE on the remote
repeatedly until both “PROGRAM” and
“SHUF” disappear.
3
Press MENU/NO on the remote to
display “Edit Menu.”
4
Press
.
or
>
repeatedly until “S.F
Edit?” appears in the display, and then
press ENTER/YES on the remote.
5
Press
.
or
>
repeatedly until
“Fade In?” or “Fade Out?” appears in
the display, and then press ENTER/YES
on the remote.
6
Press
.
or
>
repeatedly to select
the track number you want to Fade-in
or Fade-out, and then press ENTER/
YES on the remote.
“Time 5.0s” appears.
7
While monitoring the sound, press
.
or
>
repeatedly to change the Fade-
in, or Fade-out recording time.
The system plays the portion that will be
recorded over using the Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds
in 0.1-second increments. You cannot set
the time longer than the track.
8
Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
9
Press ENTER/YES on the remote.
“S.F Edit: **%” appears while the track is
being recorded. When the recording
finishes, “Complete!” appears for a few
seconds.
To cancel the operation
Press MENU/NO on the remote during steps 4
through 8. After recording starts in step 9, you
cannot interrupt the operation.
Notes
• Do not disconnect the power cord or move the
system while recording is in progress. This may
damage the recording data, preventing recording
from being performed properly.
• Do not use an MD that is damaged or dirty, this
may prevent data from being recorded properly.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it is returned to the original level.
• While the timer is activated, you cannot change the
recording level.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.