9
Getting Started
PWR
My Phone
12:34P 12/25
:Saved #s
:Features
Sony
555-1212
:Options
END
SEND
#
*
PWR
CLR
1
2
3
4
5
6
7
8
9
0
Turning the Phone On
Extending and retracting
the antenna
Extend the antenna to maximize signal
strength and minimize interference. When
you make or receive a call, hold the end of
the antenna and pull up until fully
extended. When you are not in a call, push
the antenna down until fully retracted.
Powering on
To turn your phone on, hold down
PWR
for about two seconds.
Powering On
appears on the screen, the
LED
flashes
green, the phone beeps and searches for a
signal. When a service signal is found, the
standby display appears. Your phone is
ready to use.
Powering off
Hold down
PWR
for about two seconds.
The phone beeps and displays the message
To turn off: Hold down the POWER
key
. You hear a second beep, then
Powering
off
appears on the screen. When you release
PWR
, the phone turns off.
Display screen
Your phone’s display screen has five information lines. Each line can
display up to 12 characters. The top line displays icons which tell you
the status of your phone. Lines two through five change depending on
the current operation. The bottom line is usually a prompt for an
operation. See the following basic examples:
Standby mode
Phone Book
phone status
phone status
“banner”
name
time and date
menu prompt
phone #
menu prompt
menu prompt
The next page provides detailed information regarding your phone’s display.
LED
SB200 04-11 prep
4/9/99, 2:21 PM
9