PEGA-SA10 3-659-902-
11
(1).US
PEGA-SA10 3-659-902-
11
(1).US
25
24
Notes on use
Placement limitations
• To prevent malfunction, do not use or store the adapter in
locations subject to:
– Extremely high temperatures
The temperature rises extremely high in a car that is parked in
the sun, or a car with its windows closed during the summer.
Leaving the adapter in a car under these conditions may cause
deformation of the adapter case or malfunction of the adapter.
– Direct sunlight or heat sources
Use or storage of the adapter in direct sunlight, or near a heat
source may cause deformation of the adapter case or
malfunction of the adapter.
– Strong vibrations
– Strong magnetic fields
– Sand
Protect the adapter from sand in sandy locations such as the
beach. Sand may cause the adapter to malfunction or damage
it irreparably.
On use
• Do not drop the adapter or subject it to strong physical shocks.
• Keep the adapter away from TV sets, AM radio receivers, radio
tuners and other sources of radio interference.
• Prevent the connector of the adapter (or the cord) from
contacting any metal objects which may cause a short circuit.
On cleaning
• Clean the adapter with a soft dry cloth or tissue paper. If the
adapter is badly soiled, moisten a soft cloth with a mild
detergent solution, wring it out well, and use it to wipe the
adapter. Wipe off any remaining moisture with a soft, dry cloth.
• Do not use any type of solvent, such as alcohol, thinner, or
benzine. Use of such solvents may cause deformation of the
adapter case or damage to the finish.
• When using a chemical cleaning cloth, follow the instructions
included with the cloth.
• Use of volatile sprays, such as insect spray, or leaving the
adapter on a rubber or vinyl product may cause deformation of
the adapter case, or the coating to peal off.
On moisture condensation
If the adapter is brought directly from a cold to a warm location,
moisture may condense inside the adapter. Use of the adapter in
such a condition may cause a fire or malfunction within the
adapter. When moisture has condensed, allow the adapter to sit at
least an hour
before using it.
Troubleshooting
Playback
• Buttons on the Audio Adapter do not work.
Slide the HOLD switch on the Audio Adapter to OFF.
Unless you turn off your CLIÉ handheld while Audio
Player for Adapter is running, pressing a button on the
Audio Adapter does not start the CLIÉ handheld.
Charge the built-in battery in the CLIÉ handheld
sufficiently.
• I hear some skips and noise during playback.
Check the MP3 format. For the MP3 formats available for
playback, see “What you can do with the Audio Player” in
the online manual of Audio Player for Adapter.
• I cannot start up Audio Player for Adapter or cannot play back
audio sound files.
Disconnect and connect the connector several times.
Charge the built-in battery in the CLIÉ handheld
sufficiently.
• I cannot hear the sound of movie files by gMovie.
Charge the built-in battery in the CLIÉ handheld
sufficiently.
US06OTH-U.p65
9/28/01, 10:01
24-25
