Sony CDX-R5610, Руководство по эксплуатации

Страница: 9 / 52

9
Receiving a station through a list
— list-up
You can list up the frequency or the name. For
details on labelling a station, see page 10.
1
Select the band, then press (LIST) .
The frequency or station name appears.
2
Press (LIST) repeatedly until the
desired station appears.
After 5 seconds, the unit returns to normal
reception mode.
3
Press
(SEEK)
+/– to receive the
station.
With the card remote commander
In step 2, to select the station, press
M or m .
Other functions
Changing the sound settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press (SEL) repeatedly until “BAL,”
“FAD” or “SUB” appears.
The item changes as follows:
LOW * 1
t
MID * 1
t
HI * 1
t
BAL
(left-right)
t FAD
(front-rear)
t
SUB (subwoofer volume)* 2
*1
When EQ3 is activated (page 9).
*2
When the audio output is set to “SUB”
(page 10).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2
Press the /– button
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
< , M , ,
or m .
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press
(EQ3)
repeatedly to select the EQ3 type.
2
Press
(SEL)
repeatedly until “LOW,”
“MID” or “HI” appears.
3
Press the /– button
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold
(SEL)
before the setting is
complete.
continue to next page t