Sony CDX-HS70MW - Marine Stereo, Руководство по обслуживанию

Страница: 5 / 42

5
CDX-HR70MS/HR70MW/HS70MS/HS70MW
SECTION 2
GENERAL
• LOCATION OF CONTROLS
This section is extracted
from instruction manual.
6
Location of controls and basic operations
Main unit
Front panel opened
SELECT
S
E
E
K
S
E
E
K
OFF DSPL
MODE
GP/ALBM
REP SHUF
PAUSE
SOURCE
CDX-HS70MW
CDX-HS70MS
CDX-HR70MW
CDX-HR70MS
RESET
7
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A DSO button 4
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
B
OFF button
To power off; stop the source.
C SCRL (scroll) button (CDX-HS70MW/
HS70MS) 9
To scroll the display item.
AF (Alternative Frequencies)/TA
(Traffic Announcement) button (CDX-
HR70MW/HR70MS) 10
To set AF and TA in RDS.
D
Volume control dial 12
To adjust volume.
E
Number buttons
CD/MD* 1 :
(1) / (2) : GP * 2 /ALBM * 3 –/+
To skip albums (press); skip albums
continuously (press and hold).*
4
(3)
:
REP 9, 13
(4) : SHUF 9, 13
(6) : PAUSE * 5
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
F OPEN switch 5
G
Display window
H
DSPL (display) button 9, 10
To change display items.
I EQ3 (equalizer) button 12
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
J
Receptor for the card remote
commander
K BTM/CAT
*
6 button (CDX-HS70MW/
HS70MS) 9
To start the BTM function (press and hold).
PTY (Program Type) button (CDX-
HR70MW/HR70MS) 11
To select PTY in RDS.
L
SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
M
SELECT button
To select setup items.
N
SOURCE button
To power on; change the source (Radio/CD/
MD*
1 /AUX).
O
Frequency select switch (CDX-
HS70MW/HS70MS)
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
P
MODE button 9, 13
To select the radio band; select the unit* 7 .
Q
RESET button 5
R
Disc slot 5
To insert the disc.
S Z (eject) button 5
To eject the disc.
continue to next page t
8
Card remote commander
RM-X151
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5).
w;
< ( . )/ , ( > ) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
wa
VOL (volume) +/– button
To adjust volume.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd M (+)/ m (–) buttons
To control CD, the same as (GP/ALBM) –/+
on the unit.
wf SCRL (scroll) button 9
To scroll the display item.
wg
Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When an ATRAC CD is played.
*3 When an MP3/WMA/AAC is played.
*4
If the changer is connected, the operation is
different, see page 13.
*5
When playing back on this unit.
*6 When the SAT tuner is connected.
*7
When a CD/MD changer is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.