14
Actual total number:
Sony CDX-C610RDS (
E
,F,G,I) 3-856-122-12(2)
EN
Muting the sound
Press
(MUTE)
.
“MUTE-ON” flashes.
To restore the previous volume level, press
(MUTE)
again.
Changing the sound and
display settings
You can set:
•AMBER/GREEN to change the illumination
color to amber or green.
•BEEP to turn on or off the beeps.
•DIM (Dimmer) to change the brightness of
the display.
•D.INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•LOUD (Loudness) to enjoy bass and treble
even at low volume. Bass and treble will be
reinforced.
•RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
—Select “NORM” to use the rotary remote
as the factory preset position.
—Select “REV” when you mount the rotary
remote on the right of the steering
column.
1
Press
(SHIFT)
, then press
(2)
(SET UP).
2
Press
(2)
(SET UP) repeatedly until the
desired setting mode appears.
Each time you press
(2)
(SET UP), the item
changes as follows:
CLOCK
n
AMBER/GREEN
n
BEEP
n
DIM
n
D.INFO
*
n
LOUD
*
n
RM
*
When you have not tune the station or there is no
CD/MD being played, these items will not appear.
3
Press
(4)
(
n
) to select the desired
setting (for example: ON or OFF).
4
Press
(SHIFT)
.
When the mode setting is complete, the
normal playback mode appears.
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
If you need to mount the rotary remote on the
right of the steering column, you can reverse
the operative direction of the controls.
Press
(DSPL)
for two seconds while
pushing the VOL control.
Tip
You can control the operative direction of controls with the
unit.
Adjusting the sound
characteristics
You can adjust bass, treble, balance and fader.
Each source can store the bass and treble level
respectively.
1
Select the item you want to adjust by
pressing
(SOUND)
repeatedly.
VOL (volume)
n
BAS (bass)
n
TRE
(treble)
n
BAL (balance)
n
FAD (fader)
2
Adjust the selected item by pressing
(+)
or
(–)
.
Adjust within three seconds after selecting.
(After three seconds, the buttons work as
volume control buttons.)
To increase
To decrease
