9
EN
Radio/Other Functions
Displaying the station name
Press
(DSPL)
during radio reception.
Each time you press
(DSPL)
, the item
changes as follows:
z
Station name
*
z
Frequency
z
Clock
*
If the station name of a station is not stored, “NO
NAME” appears in the display for one second.
Erasing the station name
1
Tune in any station and press
(LIST)
for
two seconds.
2
Press
(DSPL)
for two seconds.
3
Press
(+)
or
(–)
to select the name that
you want to erase.
4
Press
(5)
(ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press
(LIST)
for two seconds.
The unit returns to the normal radio
reception mode.
Locating a station by
name
— List-up
1
Press
(LIST)
momentarily.
The name assigned to the station currently
playing appears in the display.
2
Press
(LIST)
repeatedly until you find the
desired station.
3
Press
(5)
(ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode. To
turn off the display, press
(DSPL)
.
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader.
Each source can store the bass and treble levels
independantly.
1
Select the item you want to adjust by
pressing
(SOUND)
repeatedly.
VOL (volume)
n
BAS (bass)
n
TRE
(treble)
n
BAL (balance)
n
FAD (fader)
2
Adjust the selected item by pressing
(+)
or
(–)
.
Adjust within three seconds after selecting.
(After three seconds, the buttons function
as volume control buttons.)
Muting the sound
Press
(MUTE)
.
“MUTE-ON” flashes momentarily.
To restore the previous volume level, press
(MUTE)
again.
Tip
The unit decreases the volume automatically when a
telephone call comes in (Telephone mute function).
SUR EQ
FM1
ENTER
SUR EQ
3
