background image

Recording From CDs

15

Recording From CDs

Recording From CDs

Recording From CDs

7

Reverse the tape to side B and press 

·

 or 

P

 on

the player to resume playing the remaining tracks.

To cancel Time Edit

Press CONTINUE.

You can program the tracks you want in advance

Select the tracks before doing the above procedure. The
player creates a program from the remaining tracks.

You can freely specify the tape length

Set the tape length using the 

 AMS 

±

 control.

Example: When the tape length of one side is 30 minutes

and 15 seconds
1 To set the minutes, turn 

 AMS 

±

 until

“30” appears in the display, then push

 AMS 

±

.

2 To set the seconds, turn 

 AMS 

±

 until

“15” appears in the display, then push

 AMS 

±

.

You can check and change the program

See page 13.

Fading In or Out

You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.

To

Start play fading in

End play fading out

Note

Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 10), the play
fades out for about 2 seconds.

Fading out at the specified time
(Time Fade)

You can have the player fade out automatically by
specifying the playing time. Once you set the Time
Fade, it works twice, that is, the play fades out at the
end of both sides of a tape.

1

Press EDIT/TIME FADE repeatedly before you
start playing until            and “A” in the
indication appear in the display.

2

Press 

0

 or 

)

 to specify the playing time.

Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.

n

  C-46 

˜

 C-54 

˜

 C-60 

˜

 C-74 

˜

 C-90 

˜

 - -. - - 

N

(23.00)

(27.00)

(30.00)

(37.00)

(45.00)

EDIT/TIME FADE*

0

/

)

FADER

P

·

(Continued)

FADE

TIME

A

Press FADER

During pause.             lights up in the
display and the 

Q

 indication flashes.

The play fades in.

When you want to start fading out.
            lights up in the display and the

q

 indication flashes. The play fades

out and the player pauses.

FADE

FADE

Содержание CDP-C591





















Отзывы: